TRIVIEW 5520HDU9P0, User Manual

Page: 24 / 38

8
7
TV OPERATION AND SYSTEM SETUP
SELECT INPUT SOURCE
Press
SOURCE
button to display the input source list;
Press button to
select the input source you want to watch;
Press ENTER button to enter the input source;
Remote Control
Remove the battery cover, and insert two AAA (1.5V) batteries; make sure that the polarity of the battery is
consistent with the marks "+/-" in the battery slot.
Point the remote control to the receiver window. The objects between remote control and the receiver
window may disturb the normal operation.
Keep the remote control away from strong vibration. In addition, do not set or put the remote control in
direct sunshine, which may result in deformation of the remote control .
The remote control may be invalid if the receiver window is in direct sunshine or strong light; in this case,
please adjust the angle of the light or the device, or approach the remote control to the receiver window.
The effective range of the remote control may be affected if the battery voltage is low; in this case, please
replace with a new battery; if the remote control won't be used or battery voltage is too low, please take out
the battery to avoid corrosion due to battery liq uid leakage.
Do not mix different types of batteries, or used and new batteries.
Do not throw the batteries into fire, charge or break up, or charge, short circuit, disassemble, heat or burn
the used batteries. Please follow the environmental protection regulations to disposal of the batteries.
Installing battery
Precautions of remote control usage
Remove batteri es when the remote is not used for a long time.
Press MENU button to display the MAIN OSD MENU;
Press button to select the MENU you want;
Press ENTER
button or button to enter the sub menu, and press button to return
back to the previous menu.
Press button to select the option and then press
ENTER
button or button to
enter the submenu, press button to adjust the value or press button to select
in the sub menu;
You can press MENU button to save and return back to the previous menu, and press
EXIT button to exit the entire menu.
Press
INFO button on the remote control to display program information.
1. Current program Number.
2. The NICA M mode of current program.
3. The sound system of current channel could be changed on Analog Manual Search
Menu.
TV OPERATION AND SYSTEM SETUP