GENERAL INFORMATION
112
Passenger Seat and Seat Cowl
Note
This section applies to both the
passenger seat and the seat cowl. The
seat cowl is installed to certain models
only, or is available as an accessory.
The passenger seat lock is located on
the left hand side of the rear bodywork,
in line with the footrest mounting rail.
Removal
cjxc
1
2
1.
Seat lock
2. Passenger seat
To remove the passenger seat:
▼
Insert the ignition key into the seat
lock and turn it counter-clockwise
while pressing down on the front of
the seat. This will release the
passenger seat from its lock.
▼
Slide the passenger seat forward for
complete
removal
from
the
motorcycle.
Warning
Never ride the motorcycle with the
passenger seat detached or removed.
To prevent detachment of the seat
during riding, after installation always
grasp the seat and pull firmly
upwards. If the seat is not correctly
secured, it will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Reinstall
To re-install the passenger seat:
▼
Engage the seat's tongue under the
bracket.
▼
Align the locating peg to the lock and
press down engaging the seat lock.
An audible click can be heard when
the seat is fully engaged in its lock.
cjwv
2
3
4
1
1.
Locating peg
2. Lock
3. Bracket
4. Tongue
Summary of Contents for Street Triple R 2022
