General Information
33
To reset the clock:
• Select the clock display.
• Press and hold the SCROLL button
for one second, the clock’s hour
display will start to flash. Release
the SCROLL button.
To reset the hour display:
• Make sure the hour display is still
flashing then press and release the
SCROLL button to change the
setting. Each individual button
press will change the setting by
one digit.
• When the correct hour display is
shown, press and hold the SCROLL
button for one second. The hours
display is set and the minutes
display will begin to flash. The
minutes display is adjusted in the
same way as for the hour display.
• Once both hours and minutes are
correctly set, press the SCROLL
button for one second and the
display will cease to flash.
Service Interval
1
2
1.
Remaining distance
2.
Service symbol
When the ignition is switched on and
the distance to the next service is
61 miles (100 km) or less, the display will
flash the service symbol for five seconds
after ignition is switched on.
When the remaining distance is 0 miles
(0 km) or overdue, the service symbol
will remain on until the service has been
carried out and the system has been
reset by your authorised Triumph
dealer.
