Cleaning and Storage
117
Where to be Careful
Caution
Do not spray any water at all near the
air intake duct. The air intake duct is
normally located under the rider’s seat,
under the fuel tank or near the
steering head. Any water sprayed in
this area could enter the airbox and
engine, causing damage to both items.
Caution
Use of high pressure spray washers is
not recommended. When using
pressure washers, water may be forced
into bearings and other components
causing premature wear from corrosion
and loss of lubrication.
Avoid spraying water with any great
force near the following places:
• Instruments;
• Brake cylinders and brake calipers;
• Under the fuel tank;
• Air intake duct;
• Headstock bearings;
• Wheel bearings.
Note:
• Use of soaps that are highly
alkaline will leave a residue on
painted surfaces, and may also
cause water spotting. Always use a
low alkaline soap to aid the cleaning
process.
Washing
Prepare a mixture of cold water and
mild automotive cleaner. Do not use a
highly alkaline soap as commonly found
at commercial car washes because it
leaves a residue.
Wash the motorcycle with a sponge or
soft cloth. Do not use abrasive scouring
pads or steel wool. They will damage the
finish.
Rinse the motorcycle thoroughly with
cold water.
