3 of 8
Note:
•
Read the warning notices printed on the cleaning
wipe packet in the fitting kit.
•
The surface to which the reed-switch is affixed
must be clean and dry to ensure that the
adhesive has a sound base to adhere to. Use the
cleaning wipe supplied for this purpose.
5.
Peel off the backing strip from the adhesive pad on the
reed-switch magnet. Align the magnet to the fixing
holes in the side panel and secure using the self
tapping screws supplied.
Note:
•
Ensure the magnet is fitted in the orientation
shown below.
1. Right hand side panel
2. Reed-switch magnet
3. Lower mounting, side panel
Note:
•
Read the warning notices printed on the cleaning
wipe packet in the fitting kit.
•
The surface to which the reed-switch is affixed
must be clean and dry to ensure that the
adhesive has a sound base to adhere to. Use the
cleaning wipe supplied for this purpose.
6.
Peel off the backing strip from the adhesive pad on the
reed-switch.
7.
Locate the reed-switch to the bottom edge of the relay
bracket, as shown below. Apply firm and even pressure
to the reed-switch to ensure a good bond is achieved.
1. Reed-switch
2. Relay bracket
1
2
cfoh
3
1
2
cfoe
