FIGURE 2
FIGURE 3
Step 2
Before Starting Step 2, Double Check That All Loose Table Components and Packing
Materials Are Removed From The Main Table Cabinet.
When all the parts are out of the Main Table Cabinet
P1
, replace the Billiards Playfield
P21
.
Attach the Billiards Playfield
P21
by using screws
H12
.
Tighten, but do not strip out Screws H12
Step 3
Insert Corner Pockets Shields
P22
and Side Pocket Shields
P23
into
the the cabinet pockets using Screws
H8
.
Tighten, but do not strip out Screws H8
NOTE: Carefully pull and hold each
Pocket Shield tight into the pocket
for correct screw installation.
16 pcs -
H12
3.5 x 28mm Phillips Round Head Screw
PARTS REQUIRED:
12 pcs -
H8
3.5 x 14mm Phillips Round Head Screw
4 pcs -
P22
Cornet Pocket Shield
2 pcs -
P23
Side Pocket Shield
P23
H8
H8
P22
P1
P21
H12
H12
Note: While installing
the H12 screws,
press down on the Billiard
playfield to insure it is
seated correctly into the
P1 Main Cabinet.
Note: Double check that
Air Motor Cord is
plugged into Air Motor
