8 of 24
Technical Bulletin
184
Issue
1
Note:
•
There is a small delay while the instruments and chassis ECM are checked for up to date calibrations.
•
The software will report if any calibrations are out of date and will prevent unlocking until the correct
calibrations are installed.
•
The unlock code can be found at www.triumphonline.net.
Final Steps
• Check and erase all stored Chassis ECM, Engine ECM and ABS DTC’s.
• Disconnect the Triumph Diagnostic Tool.
• Refit the rider’s seat.
• Check that the motorcycle can be powered ON and started using each key.
• Set the instruments to display the correct language and units for your region, as described in the
Owners Handbook.
