TRIUMPH
BOARD
a.s.
Page
5
of
26
RESISTIVE Series
o
Make sure the mounting hardware is securely anchored to a solid structure.
o
Only plug the power cord, power plug or power adaptor into an AC power outlet with the proper
and indicated power supply voltage and is effectively grounded (earthed) through the normal
wiring. If this product is used at a power supply voltage other than the one indicated, it would fail
and may result in fire or electric shock.
o
If the power cord or power plug or power adaptor cannot be plugged into the AC power outlet,
contact a licenses electrician to replace the AC power outlet with a properly grounded (earthed) one.
o
When you operate this product, the AC power outlet should be near this product and easily accessible.
o
The fact that this product operates satisfactorily does not imply that the AC power outlet is
grounded (earthed) and that the installation is completely safe. For your safety, if in any doubt
about the effective grounding (earthling) of the AC power point, consult a qualified electrician.
o
Do not defeat the purpose of the grounding (Earthling) plug (for example, do not use a conversion
plug).
o
Always plug the power cord, power plug or power adaptor securely and firmly into an AC power
outlet. Otherwise, overheating will occur, possibly resulting in electric shock or fire.
o
Do not pull, bend, rest objects on, or chafe the power cord or power plug or power adaptor.
Damage to the power cord or power plug or power adaptor can cause fire or electric shock.
o
Do not attempt to repair the power cord, power plug or power adaptor. If the power cord or power
plug or power adaptor is damaged or frayed, contact an authorized service representative for a
replacement.
o
Periodically clean the power cord or power plug or power adaptor to ensure the connection is free
of dust.In a damp environment, a contaminated connector can draw a significant amount of current
that can generate heat and eventually cause fire if left unattended over an extended period of time.
o
Never portable the power cord or power plug or power adaptor with wet hands. Electric shock will
result.
o
Stop operation immediately if your product emits smoke, excessive heat, abnormal smell or unusual
noise. These conditions can cause fire or electronic shock. Immediately turn your product off and
unplug the power cord or power plug or power adaptor, and contact an authorized service repre
sentative for service.
o
When disconnecting this product, hold the power plug or the power adaptor instead of the power
cord. Pulling on a power cord forcibly can damage it and cause fire or electric shock.
o
To prevent fire or shock hazard, do not expose this product to rain or any type of moisture.
Safety Information (Continue...)
