TRIUMPH
BOARD
a.s.
Page
15
of
26
RESISTIVE Series
Normally, Setup program will start automatically. If it does not start automatically, double-click
the CD-ROM icon on your computer to open CD-ROM folder, and then right-click the setup file TB
RESISTIVE DRIVER.exe and run it as Administrator.
If user has 64-bit machine, after TB RESISTIVE DRIVER.exe installation continue with
64bit-Update for Driver.exe.
The setup application will set the default language according to your operating system.
Notice:
Silicon Laboratories Drivers should be run automatically during TB RESISTIVE DRIVER installation
if computer is connected to the internet. If not, double-click the setup file CP210x_VCP_Win_XP_
S2K3_Vista_7.exe to run installation manually.
Attention
Do not connect cable before software installation. Some functions are subject to the restrictions of the
operating system.
Please follow up below procedure to completely install the TRIUMPH BOARD Drivers software into your
computer before you make any application upon the TRIUMPH BOARD Interactive Whiteboard.
For proper function of TB RESISTIVE Driver follow the default save path.
Step 1: Start to install driver
Step 2: Select save path to continue. Use RMeasiteach
save path for proper function of Hotkeys in RMeasiteach
software
