16
9. Basic Operations
Start-up / shutdown
Use 100-240V AC as the power supply.
The Power button on the front panel and the remote control can be used to switch between power ON and OFF
state.
Auto standby shutdown
In the Android main interface, whether there is signal input or not, the device will not auto shutdown.
In the non-Android main interface, if there is no signal input within 5 min, the device will automatically shut off.
Upgrade Android firmware
For OTA online upgrade please connect device to internet either via Wi-Fi or LAN cable. Afterwards go to
Settings – System– System Update - Check Update. If there is new update available, you will be asked to
upgrade the device. Follow the instructions on screen to install the newest Android firmware.
Please make sure
you always have the newest Android firmware installed.
Settings save before shutdown
Before shutdown, the device will save the display and sound settings. Upon restart, these settings will be used.
Source Switching
You can use the remote control or Input Settings icon
to switch the source by the following methods:
Method one: press the “Signal Source” key on the remote controller to call “Signal Source Menu”, press the
cursor key on the remote control to select a signal source, press the “OK” key, the device will switch to the
selected input signal source.
Method two: Press the Input Settings icon on top right corner. Input settings will pop up, select signal source,
the device will switch to the selected input signal source.
Display Settings
Start Common Settings > click on three dots > Display, to adjust display frame back light, color temperature,
aspect ratio, image mode, saturation and so on. (adjustable only on non-Android input).
Audio Settings
Start Common Settings > click on three dots > Sound, to adjust volume, bass, treble, sound output device and
so on.
Change Password
Select Settings > System > Lock Screen Password. Set desired 4-digit password. Password can be changed
after entering initial password in password settings.
If the password is forgotten, please contact after-sale personnel (see page 25) on how to reset the password.
