48
48
Two images, Side-by-Side(Half) format
`
Select “3D” --> “3D Format” from OSD and choose “Side-by-
Side(Half)” for input signal is HDMI 1.4a 3D. 3D Format is
only supported on 3D Timing on page 42.
Image does not display in 3D
`
Check if the battery of 3D glasses is drained.
`
Check if the 3D glasses is turned on.
`
Select “3D” --> “3D Format” from OSD and choose “Side-by-
Side(Half)” for input signal is HDMI 1.4a 3D. 3D Format is
only supported on 3D Timing on page 42.
On Screen Messages
Power off confirm
Power Off?
Press power key again.
Fan lock error
The proejctor will switch off automatically.
Warning! FAN LOCKED
No source found
VGA 1
No Source Found
Out of display range
Over temperature
Warning! TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 40 degree C.
Troubleshooting
Summary of Contents for 2000
Page 56: ...55 Notes ...
