background image

1. 2     Originals Prohibited from Duplication

 

 
 
It may not be allowed to copy every type of original. 
You may be punished by the law if you possess the copy of some types of originals. 
We recommend you to consider the following before you copy originals. 
 
 
[Originals prohibited from copying by the law] 
 
     1.  It is not allowed to copy Currency (Bill, Money, Bank Note, etc.), Government issued 
          Negotiable Instruments (National Bonds, Security, Local Debt Bonds, etc.). 
     2.  It is not allowed to copy Foreign Currency or Foreign Negotiable Instruments. 
     3.  It is not allowed to copy unused postal stamps or government postcards without permission 
          to make replica from Government. 
     4.  It is not allowed to copy Government issued revenue stamps, certificate stamps which are  
          prescribed by Liquor Tax Act or the Commodity Tax Act. 
 
 
[Special items] 
 
     1.  It is warned by the government to copy private issued securities (stock certificate, draft, 
          check, goods ticket, etc.), commutation ticket or book of tickets, excluding that some specific 
          company copies such originals as many as it requires for its own business. 
     2.  We recommend you do not copy freely originals such as government issued passport, public 
          or private issued licenses, automobile inspection certification, IDs and tickets like pass or  
          meal. 
 

Reference Law 

Prohibited items to copy 

Regulations to control fake currency and 
Bond. 
 

Currency (Bill, Money, Bank Note, etc.),  
Government issued Negotiable Instruments  
(National Bonds, Security, Local Debt Bonds, 
 etc.) 

Control Law against Forged & faked 
Foreign Currency, Bill, Bank Note and Bond

Foreign Currency or Foreign Negotiable 
Instruments 

Forged postal stamps control law 

Unused postal stamps or government postcards 

Forged revenue stamps control law 

Government issued revenue stamps, and 
certificate stamps prescribed by Liquor Tax Act 
or Commodity Tax Act  

Currency similarity securities Control Law 

Private issued securities (stock, draft, check, 
goods ticket, etc.), commutation or book tickets 

 
 
[Originals protected by the copyright] 
 
     It is prohibited to copy such originals as books, music, paintings, printed copy, maps, drawings, 
    movie and pictures which are protected by the copyright, except for personnel, family use or 

Chapter 1     Before Use 

1-3

    similar purpose. 

Summary of Contents for CX 8020





















































































Reviews: