4
GB
Technical Abbreviations Key
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Wear protective shoes
Wear protective clothing
Be aware of kickback!
WARNING:
Sharp blades or teeth!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
WARNING:
Moving parts can cause crush and cut injuries
Caution!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Specification
Model no:
TTS1400
Voltage:
220-240V~ 50Hz
Power:
1400W
No load speed:
2000 – 5000min
-1
Bevel adjustment:
0° - 48°
Max depth of cut @ 90°:
With track:
54mm (2-1/8")
Without track:
59mm (2-21⁄64")
Max depth of cut @ 45°:
With track:
38mm (1-1/2")
Without track:
42mm (1-21⁄32")
Blade dimensions:
Ø165mm (Ø6-1/2") x 20mm
Protection class:
Ingress protection:
IP20
Weight:
5.4kg (12lbs)
As part of our ongoing product development, specifications of Triton products may
alter without notice.
Sound and vibration information
Sound pressure L
PA
:
93.87dB(A)
Sound power L
WA
:
104.87dB(A)
Uncertainty K:
3dB
Weighted Vibration a
h
(body):
2.955m/s
2
Vibration a
h
(handle):
2.036m/s
2
Uncertainty K:
1.5m/s
2
The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another. The declared vibration total
value may also be used in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used. There is the need
to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle
such as the times when the tool is switched off and when it is running idle in addition to
the trigger time).
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Original Instructions
Introduction
V
Volts
~, AC
Alternating current
A, mA
Ampere, milli-Amp
n
0
No load speed
Ø
Diameter
°
Degrees
Hz
Hertz
W, kW
Watt, kilowatt
/min or
min
-1
(revolutions or reciprocation)
per minute
dB (A)
Decibel – A weighted
m/s
2
Vibration magnitude
950638_Z1MANPRO1.indd 4
30/11/2017 09:21
