9
Installation
- FIT TO THE WALL & CONNECT THE SHOWER SUPPLIES
ELECTRICAL INSTALLATION
IMPORTANT:
Switch off the electricity supply at
the mains before proceeding.
• The supply cable
MUST
be secured either by
routing through conduit, in trunking, or by
embedding in the wall, in accordance with
IEE regulations.
NOTE:
Conduit entry can only be from rear.
Installation
- ELECTRICAL INSTALLATION
NOTE:
Deviations from the designated entry
points will invalidate product approvals. The
cable entry points are listed on
page 3
.
• Seal around rear entry cable to prevent water
ingress into the wall.
FIT TO THE WALL & CONNECT THE
SHOWER SUPPLIES
• The water inlet has been designed to
allow left or right fitting -
(fig.8)
decide
the inlet direction and then turn the inlet
either left or right.
6
check list
7
check list
SECTION
SECTION
Fig.8
Turn the inlet 180°
for right entry fitting
IMPORTANT!
The water inlet MUST ONLY be used in
the ‘Left’ or ‘Right’ entry position.
