Push button mixer shower
11
FITTING THE RISER/FIXED HEAD RAIL
Temporariliy fit the riser rail to the mixer shower
by gently pushing and rotating into place - adding
a little grease can help to ease the rail into place
(fig.16)
.
Mark the centre hole for the wall bracket.
Remove the riser and drill and plug the wall.
An appropriate drill bit should be used. If the wall
is brick, plasterboard or a soft building block, use
appropriate wall plugs and screws should be used.
Secure the bracket to the wall
(fig.17).
Refit the rail.
IMPORTANT:
When installing the wall
bracket, care must be taken not to damage the
decorative surface finish.
Triton recommend the use of an appropriate tool
with a soft cloth, or similar, placed between the
product and the tool
(fig18)
.
Fig.18
Fig.16
Fig.17
Summary of Contents for 2181629F
Page 22: ...Push button mixer shower 20...
Page 23: ...Push button mixer shower 21...
