Bar mixer shower
9
INSTALLATION
FITTING THE DIVERTER
Before the mixer shower can be fitted to the wall
brackets the diverter must be fitted.
Carefully push the diverter onto the connector at
the top face of the valve
(fig.7).
Once the diverter has been fitted and faces
forward, fully tighten the small retaining grub
screw located at the rear of the diverter assembly
(fig.8).
FITTING THE MIXER SHOWER
Offer the shower valve to the bar mixer brackets,
check that the sealing washers are in place and
carefully tighten the nuts.
Care must be taken not to damage the chrome
plated surface
(fig.9).
Fig.7
Fig.8
Fig.9
