7.
User manual | T-FOLLOW-440 Triton Blue | September 2018 | www.triton-blue.com
english
bare eyes.
• Check before connecting 220V AC to make sure the power switch socket is well connected. To ensure the safety of
power supply, use a qualified power outlet or cut off the plug to connect the switch directly. The grounding line of
this light is yellow/green.
• The bulb will produce high temperature when working, so it needs to be forced to air cooling, if the refrigeration
fan motor can not work properly, do not use the followspot.
• Attention should be paid to the movement or installation and use of metal lamps to avoid collisions with lights.
• Please check if there is any damage due to transportation or screw loosening before use.
• Please install the lights in Celsius below 40ºC ventilated dry environment, at the same time to ensure smooth
ventilation slot.
• When using lights can not be installed on the surface of ordinary combustible objects, and more than 100 cm away
from combustible objects, lights must be grounded reliable connection.
• The lens on the lamp produces visible failure degree damage, such as cracks or deep marks, should be replaced.
When the light source is damaged or deformed, it should be replaced.
• During installation, wiring, commissioning and inspection, power operation is strictly prohibited and shall be ca-
rried out by professional personnel.
• Users are not allowed to alter their machines without authorization.
• The correct way to clean the mirror is to wet a clean piece of velvet with vinegar or household ammonia. Start with
the center and scrub the mirror lightly. You can also scrub the mirror with water, but the spots will be left after
drying. These spots can be gently wiped off with a clean dry cloth.
• When the power is disconnected, the damaged lamp tail line should be replaced in time by the professional per-
sonnel. The specification is 3x1.5² wire.
• Identification
N
L
Earth line
Null Wire
Phase line/ Live Wire
1.0
Keep the minimum distance between the lamp and the
object being 1 meters.
Keep the shortest distance between the rear of the lamp
and the combustible is 0.5 meters.
It does not apply directly to the surface of ordinary
combustible materials.
Recycling according to EU’s waste electrical and electronic
requirements.