7
The cross rib #6 is inserted similar to the
cross rib #2.
Which means, that the remaining ridge
bar is joined to the cross rib and then,
while pushing it to the pickup element on
the keel rod, it is inserted to the pickup at
the stern segment.
Then clip the stringer elements to the
cross rib #6.
Ensure, that all snap buttons face inside
the kayak!
The stern element is fully assembled and
should result in the image on the left.
3) Inserting bow and stern element / tensioning the hull / Inserting the seats
Spread out the hull.
Open the hatch at the bow and open the
waterproof roll closure.
Then insert the bow element into the hull.
Make sure to place the frame centered
Now push the frame flatly into the bow.
It is best to kneel inside the boat and
take the frame at the back ends of the
stringer elements.
