9
TRI105.INS.001.9
Veefil-PK TRI105-350-01 Installation manual
www.tritium.com.au
Veefil® is a registered trademark of Tritium Pty Ltd. © 2018 Tritium Pty Ltd
3. Secure to foundation
Lift the Veefil-PK user unit and place
over the prepared foundation. Feed the
conduit and wiring through the power in
hole and secure to the foundation fixing
points. (Fasteners not supplied)
4. Remove enclosure access cover
Remove the enclosure access cover
screws with the 2.5mm allen key to
prepare the Veefil-PK for wiring
installation.
The enclosure access cover has an
attached gasket. Ensure this is carefully
stored to avoid damage or accumulation
of debris.
1. Remove lower plastic panels
Using the 5mm pin hex tool, unscrew the
8 security screws (only one side shown)
and remove them and the washers from
both lower plastic panels. Pull the panels
away from the fixing points to remove,
and safely store all parts.
2. Remove shipping bolts
Unscrew the 4 bolts from the shipping
base.
Installation
Summary of Contents for Veefil TRI105-350-01
Page 2: ......
