1. INTRODUCTION
The unit purchased by you has been subjected to strict quality control before leaving the factory. It also me
on it. The repair and maintenance must be con ducted by your service / maintenance installer.
It is the responsibility of the installation company performing the installation in accordance with the characteristics the project,
subject to the regulations. Before installating the necessary equipment read this manual, and carry out the directions and obserations
in it.
The manufacturer does not responds to any damages
You should check the receiving unit, which is in perfect condition. If otherwise appropriate to make a written complaint to the carrier.
3
ets the safety standards
of the CE. Do not tamper with the unit ,or subject to conditions of work not specified in this manual, you may lose any guarantee
and / or indirect, caused by improper installation.
The equipment should be installed only by a duly accredited professional.
2. DESCRIPTION OF UNIT
6-77:@-:*=42,=62<*4457-.4;
Item
Part
1
Electric
2
Plate heat exchanger
3
Electric
4
Water control
5
Wire controller
6
Water
7
Air discharge
8
Safety
9
Expansion
10
Pressure
11
Electric 3 way
12
Water
13
Needle
1
4
5
10
12
11
9
7
3
3
13
2
box
heater
PCB
tank
valve
valve
tank
Gauge
valve
pump
valve
Name
6
8
