6
Technical Specification
Model Name
Water Element
Model Number
WE-B-01
Rated Voltage
230V
Rated Frequency
50Hz
Heater Power
500W
Hot Water Temperature
85°C - 95°C
Protected Against Electric Shock Class I Type
Operating Temperature
10°C - 40°C
Operating Humidity
≤90%
Usage Guideline
1.
Remove the tamper-evident seal from plastic bottle cap. Load water bottle by lifting
and inserting it onto the probe, ensuring bottle is fully aligned with the dispenser and
centered over the probe.
2.
Place a cup under the dispenser faucet. Push the left faucet handle until water flows
continuously; next, depress the hot water button to make sure there is a continuous
flow of water.
3.
Now insert the power cord to the socket and turn ON dispenser. Turn on the hot tank
heater switch and the heating indicator will light up; after the water is heated, the
heating indictor will be off, and the heating process will be stopped automatically;
4.
Before placing the base plate to its position, please try to drain the remaining water on
the base. If disinfection is required, close the cabinet door and turn ON the
sterilization switch. The disinfection indicator will light up and the sterilization starts
to work. At this time, the cabinet door should still be closed for 1-3hrs until the
sterilization is complete.
5.
When the water in the dispenser runs out, turn OFF the heating switch and replace the
empty bottle.
Precautions
1.
This product is for indoor use. DO NOT expose the dispenser to sunlight.
2.
DO NOT modify the power plug or extend the power cable, thereby preventing fires
caused by overheated wires.
3.
If the power cable is damaged, the cable spare will be provided by the manufacturer
or replaced by specified technical service contractor.
4.
DO NOT place the dispenser near the liquid splashing place. It should be placed at a
dry and cool environment. DO NOT use it under direct sunlight or in outdoor
premises. Keep it away from any flammable substances.
5.
DO NOT let children operate this machine especially the hot water faucet to avoid
scald.
6.
If the dispenser is shutting down for long term, please switch off the power supply,
unplug the power cord and take off the water tank; open the drainage valve and let the
residual water drain out. Please remember to close the drainage valve after finishing
the drain process.
