Super SeaSpy Camera
0514-SOM-00001, Issue: 02
22
© Tritech International Ltd.
7. Troubleshooting
Symptom
Likely cause
Remedy
Image not in focus
Focal length incorrect for
application
Check original specification
when purchased
If focal length specified
matches current
application (i.e. usage has
not changed since initial
purchase) there may be a
fault with the unit
Contact
Tritech
International Ltd
for advice,
or try adjusting focus.
LEDs not adjusting to light
conditions
Fault with Dynamic Light
Control
Check original specification
when purchased
Was DLC specified to be
disabled at purchase?
If not contact
Tritech
International Ltd
to arrange
repair (there may be a
charge if the camera is out
of warranty)
LEDs not adjusting to light
conditions
DLC was disabled due to
manual control of the LEDs
being used
Cycle power to the
Super SeaSpy, leaving
several seconds between
switching off and switching
back on.
No Video output from
camera
Video line fuse has blown Check continuity of Video
line fuse.
Replacing blown fuse
should restore video feed.
