SCUv5 Communications Setup
Seanet SCU v5
0581-SOM-00002-02
Tritech International Ltd.
Page 29 of 35
instead. For a pin-out of of port A see Appendix A, Data and Control
Ports.
Single SeaKing Sensor in RS232
The V5 SCU can support direct connection of a single node to a dedicated RS232 port.
Connection should be made through the DA-15 connector, wired for RS232
communications as shown above. This configuration is single head so subsea
networking is not possible.
Multiple Sensors Connected to the SCU
The connection of multiple serial sensors to a single V5 SCU is possible. Each sensor
must feed into the SCU on its own port:
Connection should be made through the DE-9 connectors A through D, each wired
for serial communications as shown in Appendix A, Data and Control Ports (the
