Instruction manual
8
Humidity and Timer display –
When the appliance is turned on, it
displays the current humidity level in the room. When the humidity
level is adjusted, the selected humidity will blink shortly on the display
then current humidity level be shown.
When the humidity level in the room is lower than 35%, it will show
“35”. When the humidity level in the room is higher than 95%, it will
show “95”.
When setting the timer, the timer will blink shortly in the display then
be shown for a few seconds before the display reverts to showing the
current humidity level.
•
Timer -
to set a scheduled time for the appliance to switch on or
to standby.
•
Timer indicator
– Illuminates when the timer is activated.
The timer can be set between 01-24 hours.
•
To set the time for the appliance to switch on, while the appliance
is on standby, touch the timer icon, the timer indicator will
illuminate, then use the + and - icons to set the time. The time in
the display will blink for 5 seconds then stop. The time indicator
will remain illuminated until the appliance turns on.
•
To set the time for the appliance to switch off, while the appliance
is in operation, touch the timer icon, the timer indicator will
illuminate, then use the + and - icons to set the time. The time in
the display will blink for 5 seconds before it reverts to showing the
current room temperature. The time indicator will remain
illuminated until the appliance turns off.
•
To cancel the timer programming touch the timer icon twice, the
timer indicator will go out and the timer will no longer be active.
Note
: The programmed time remains unchanged if the machine stops
operating due to a full tank or during defrosting.
•
Child Lock
- Touch and hold the Child Lock icon for 5 seconds to
activate the Child Lock feature, all other functions will not work
when activated, to disable the Child Lock touch the Child Lock
icon again for 5 seconds.
•
Child Lock indicator
– Illuminates when the Child Lock is on.
•
WATER FULL
indicator
– When the drainage tank is full, the
Water Full indicator will illuminate, the appliance will stop
operating and beep15 times to alert the user that the water needs
to be emptied from the drainage tank > follow the steps in this
manual for “Emptying the Drainage Tank”.
USE
