Instruction manual
7
•
Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the
local voltage before connecting the device. Voltage 220V-240V
50Hz).
USING THE CONTROL PANEL
•
Power
- Touch once to switch the appliance on, touch again to
switch the appliance to standby.
•
Power indicator
– Illuminates when the appliance is plugged in.
•
Plus and Minus –
Touch the + or – icons to increase or
decrease the time between 01-24 hours or to adjust the humidity
level between 40% and 80% with 5% intervals.
•
Fan Speed
- Touch to switch between HIGH and LOW fan
speeds.
•
Fan speed indicators
– Indicates the selected fan speed.
•
Humidity
– Touch to change the humidity level then use the +
and – icons to increase or decrease the humidity level between
40% and 80% with 5% intervals.
After operating for a period in an environment where the humidity
level is 2 % lower than the selected humidity level, the compressor
will stop then the fan will continue to run for 3 minutes before
stopping. When the humidity of the environment is equal to or higher
than the selected humidity by 2%, the compressor will restart after 3
minutes.
EN
