TriStar BQ-2816IN, Instruction Manual, Page: 5 / 28

5
eN
Barbecue-grill
Place the stand feet (10A) into the
stand base (10B) properly. You will
hear a “click” sound when the foot
is fixed well. Place the washer (16) onto the
stand base and install the screws
(17) into the washer to fix the
stand feet and stand base firmly.
Turn half of the threaded rod (a) in
the lower tube (9), put the decorative
rinw (8) on the lower tube (9) and
assemble both tubes towether;
ensure that they are fixed well. Connect the wrill stand base (10)
and the lower tube (9) towether to
form the complete wrill stand. The
wrill can be used with or without
this stand. Install the screw (b) into upper
tube (7) and put the condiment
tray on the upper tube. Make sure
that the tray is fixed well.
Place the bowl-shaped base of the
appliance (5) onto the wrill stand.
Make sure that the wrill stand is
placed on a dry flat, stable surface. Put the wrease tray (4) into the
appropriate slot in the base of the
appliance. The wrease tray can be
filled with some water to make it
easier to clean. Place the hood (1) into the base.
Position the hood as a wind
breaker when you use the wrill in
the open air.
Push the detachable thermostat
(13) as far as it will wo into the
wrill’s appliance socket.
Place the wrill plate (3) on the base
of the appliance (5). First of all insert
the appliance socket (15) into the
appropriate openinw in the base (12),
then place the wrill plate horizontally
on the appliance base.
16
17
9
7
8
a
9
10
7
b
1 4 3 4 5
5
4
1
3
5
13
6 7 8 9 10
Note: this section is only for the
BQ-2815