EN - 6
Radio mode
Select radio as playing source
Open the SOURCE MENU and then touch
[
RADIO]
.
Select one radio band
Press the [
BAND
] key on the display panel
or remote control or touch the [
BAND
] icon
on the user interface to select one radio band
among FM1, FM2, FM3, AM1 and AM2.
Auto tuning
When the monitor is closed, press the [
] / [ ] key on the display panel or remote
control to seek automatically.
When the monitor is open, touch the [
]
/ [ ] icon on the user interface to seek a
higher / lower station.
To stop searching, repeat the operation above
or press other keys having radio functions.
Note:
When a station is received, searching stops
and the station is played.
If the unit receives a stereo broadcasting, the
indicator light of stereo ‘ST’ on the TFT or
LCD display will be lighted.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [ ] / [ ] key on remote control
or touch the [ ] / [ ] icon on the user
interface to tune in a higher / lower station.
Touch the numeric keypad icon( ) and then
touch the numeric buttons to input the radio
station frequency numbers.
Auto save
Only stations with sufficient signal strength
will be detected and stored in the memory.
When the monitor is closed, press and hold
the [
AS
] key on the display panel.
When the monitor is opened, touch the [
AS
]
icon on the user interface.
To stop auto save, press other keys having
radio functions.
Notes:
1.
After auto save, the previous saved
stations will be overwritten.
2.The unit has 5 bands, such as FM1, FM2,
FM3, AM1, AM2, and each band can store
6 stations; hence the unit can store 30
stations in all.
Manual save
When one expected radio station has been
detected:
1. Press the [
MEM
] icon on the user interface
and the preset menu will be opened.
2. Press one preset button among P1~P6.
3. If you want to abort, press the [
Exit
]
button.
Preview scan
Preview scan searching is such a process
that the searching pauses when a station is
received and then played for 5 seconds. After
being played, the unit continues the process
until the whole band is detected.
When the monitor is closed, press the [
AS
]
key on the display panel.
When the monitor is opened, touch the [
PS
]
icon on the user interface.
To stop the process, press other keys having
radio functions.
Recall the stored stations
1. Select a band(if needed).
2. There are three methods to select a preset
station.
a. Touch an on-screen preset button to select
the corresponding stored station.
b. You also can press [ ] / [ ] key on the
display panel when the monitor is open.
c. Press one numeric key among 1 to 6 on
the remote control.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the volume knob on the front panel.
Notes:
1. When the local radio station searching
is on, the indicator light ‘LOC’ lights up;
whereas the light goes off.
2. The number of radio stations that can
be received will decrease after the local
seeking mode is on.
