Close the strap to fix the
package.
7
Take care not to brake the
valve cap when doing the
last fold.
6
Start folding from the tail,
until you reach the valve.
4
Continue with folding
from the nose.
5
Open the valve cap. Push
and turn the yellow pin
so that it remains in the
DOWN position.
(push and turn)
3
Remove the fins. Release the screws and pull the fins to do so.
2
Clean and dry the board. Especially take care that no sand or dust remains at the valve.
1
HOW TO DEFLATE THE BOARD
• Do not expose to direct sunlight for an extended period of time.
• Prevent overheating!
• Do not use a compressor for inflation.
• Avoid contact with sharp obstacles.
• store at a dry place with room temperatur
• if possible, store the board inflated at low pressures (3-5PSI)
• clean and dry before packing
• Do not use aggressive chemicals for cleaning. (Soap-)water can be used for cleaning.
• tighten the valves from time to time
MAINTENANCE
