Tripp Lite USA-28XG, Owner'S Manual

Page: 28 / 40

This method assumes that you have already done the following:
•
Installed the Keyspan serial port
hardware
and MAC
software
only (not windows).
•
Installed the VirtualPC
software.
•
Installed your serial device
software
in Windows (in VirtualPC).
•
Connected your serial device
hardware
to a Keyspan serial port.
If you have not performed any of the steps mentioned above, please do so before proceeding.
Step 1
-
Check the Keyspan Serial Assistant
Before proceeding, you should check to see if the Keyspan serial port is installed correctly.
To do this, open the Keyspan Serial Assistant (located in your Applications folder). When you
open the Keyspan Serial Assistant , you will see a window similar to the one shown below:
Click on the TRIANGLE to the left of your Keyspan icon. This will display the names of the
serial port(s) on that Keyspan product as shown.
Page 28