10
AI-OTB One Touch Backup Software
Option
The
Option
tab is where you enable/disable various settings related to the backup
software. These settings are described below.
•
Check OTB Status
– Select this box to allow the One Touch Backup button on
the U338-000 to be used to initiate a backup. This option is enabled by default.
•
Show AI-OTB Backup Directory In External Disk
– Select this box to make the
backup data visible to users who access the backup drive. When this option is
disabled, users will not see the AI-OTB backup files. This option is disabled by default.
•
Confirm Before Backup
– Select this box to display a prompt every time a
backup is initiated; the prompt will ask the user to confirm that the backup
should be performed. This option is enabled by default.
•
Shutdown After Backup Completed
– Select this box to automatically shutdown
the computer after a backup takes place. This option is disabled by default.
About
The
About
tab displays general information about the AI-OTB One Touch Backup software.
14-06-010 93-3357.indd 10
6/24/2014 9:41:21 AM
