2
Package Includes
Product Features
Wire Tracking
• Main Tester
• Remote Probe Unit
• RJ45 Jumper Cable
• RJ11 Jumper Cable
• Alligator Clip Adapter
• Headphones
• 9V Battery (x2)
• Owner’s Manual
• Multi-Function Kit allows for both cable testing and wire tracking
• Find a single RJ11, RJ45, or BNC cable within a group of cables
• Determine the location of a short or breakage in non-powered wires
• Perform wire mapping on RJ45 cables, detecting shorts and open wires
• LED light on Remote Probe Unit for use in dark areas
Notes:
• The volume button is used to fine tune the tone generator. If you are having trouble with the
probe not honing in on a single cable, adjust the volume setting. When tracking a cable that has
power running through it, it is recommended to set the volume from 1-3. When tracking a non-
powered cable, set the volume from 6-8.
• The included headphones can be used when in a noisy environment to ensure you hear the
tone from the Remote Probe Unit.
• Flip the light switch on the side of the Remote Probe Unit to turn on the light for use in dark
areas.
1. If this is the first time you are using the product, insert a 9V battery into the battery
compartment of the Main Tester and the Remote Probe Unit. Flip the switch on the
Main Tester to the
Scan
position. The
Status
LED will flash to indicate the Main Tester
is ready for operation.
2. Connect the RJ11, RJ45, or BNC cable to be tracked to the corresponding port on
the Main Tester.
3. Flip the switch on the Remote Probe Unit to the
Scan
position. The
Power
LED will
illuminate to indicate the Remote Probe Unit is ready for operation.
4. Run the probe of the Remote Probe Unit along the group of cables until the tone
sounds, indicating you have found the desired cable.
15-11-220-9334E1.indd 2
12/9/2015 3:45:00 PM
