background image

6

Equipment Installation

It should be noted that the SRWO8U22 can support an equipment load up to 150 lb maximum.
For mounting of Tripp Lite UPS Systems, the 2POSTRMKITWM and/or 2POSTRMKITHD are recommended. Please refer to the instructions 
included with either kit for equipment mounting details.
For all other equipment mounting, please refer to the intended equipment’s Owner’s Manual’s for equipment installation instructions. 

Typically, this information can be found in the “Mounting” or “Rackmounting” sections of the manual. Tripp Lite has provided you with  
24 Equipment Mounting Screws, included in this package.

Storage and Service

Storage

The enclosure should be stored in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and 
gasses, conductive contaminants, dust and direct sunlight. Store the enclosure in its original shipping container if possible.

Service

Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs 
are also available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, 

follow these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of 

the instructions.

2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned 

Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial 
numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any 
damages (direct, indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service 

center is not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation 
charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose a copy of your 

sales receipt. Return the product for service using an insured carrier to the address given to you when you request the RMA.

Warranty & Product Registration

5-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date 
of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, at its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES 
OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES 
OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND 
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from 
jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are 
subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Summary of Contents for SRWO12UHD





















Reviews: