background image

8

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

4. Storage and Service

5. Warranty and Product Registration

Storage

The unit must be stored in a clean, secure environment with a temperature less than 40° C (104° F) and a relative humidity less than 90%  
(non-condensing). Store the unit in its original shipping container if possible.

Service

Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs 
are also available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, 
follow these steps:
1.  Review the installation and operation procedures in this manual to ensure that the service problem does not originate from a misreading 

of the instructions.

2.  If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
3.  If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned 

Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial 
numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any 

damages (direct, indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite  
service center is not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center must have 

transportation charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose 
a copy of your sales receipt. Return the product for service using an insured carrier to the address given to you when you request the 
RMA.

Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date 
of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES 
OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES 
OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND 
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from 

jurisdiction to jurisdiction.)
Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA 
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are 
subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Summary of Contents for SmartRack SRCABLELADDER18

































Reviews: