9
5. Enclosure Configuration
90°
2
2
Tilt the top of the panel away from the enclosure.
5.4.2 Reinstalling Side Panels
To Reinstall Side Panels, Reverse Steps 1-3
5.5 Combining (Baying) Enclosures
WARNING: Combining enclosures is not a substitute for stabilizing the enclosures. Each enclosure in a bay of combined enclosures requires
the same stabilizing measures as a standalone enclosure.
3
3
Lift the panel away from the brace that supports it.
2
1
A
B
1
Arrange the enclosures in the correct position for baying.
2
Each enclosure includes 4 baying brackets
A
that correspond to baying connection points
B
on the adjoining enclosure. The baying connection points already contain screws. Remove the
screw from each baying connection point in the adjoining enclosure.
3
3
Loosen the screw in each baying bracket and turn each bracket 90 degrees toward the
adjoining enclosure, aligning each bracket with the corresponding baying connection point on
the adjoining enclosure.
