connected devices
Supports Tripp Lite's WatchDog software application (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive gray color scheme
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
2200
Output kVA capacity (kVA)
2.2
Output Watt Capacity
(watts)
1600
Output kW capacity
1.6
Output power factor
0.7
Nominal Output Voltage(s)
Supported
220V; 230V; 240V
Nominal Voltage details
230v inverter nominal output voltage
Frequency compatibility
50 / 60 Hz
Output voltage regulation
(line mode)
-19% +8%
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
8 C13 outlet(s); 1 C19 outlet(s)
Included output power
cables
Includes 3 C13 to C14 output power cables
Built-in controllable
switched load banks
Three switchable two-outlet C13 load banks
Output circuit breaker
10A (x2) - each breaker protects 4 C13 outlets each, C19 is unbreakered
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
11.3A
Nominal Input Voltage(s)
Supported
230V AC
UPS input connection type
C20 inlet
UPS input connection
description
IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall
receptacles
Phase
Single-Phase
