Tripp Lite SmartPro Rackmount SMX1500XLRT2U Features And Specifications Download Page 2

installation requires 2-9USTAND accessory

Large internal batteries support a max load of 1500VA for 7 minutes and a half load of 750VA for 18 minutes

Expandable runtime with BP36V15-2U (limit 1) or with multiple BP36V42-3U rack/tower external battery packs

Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V

Includes 8 UPS supported outlets arranged in 3 individually controllable load banks (2 outlets per bank) that can be powered off and back

on again via software interface

IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,

event logging and running user-defined script commands.

Offers simultaneous monitoring by up to 2 directly-connected devices through included USB and DB9 interface ports, or the monitoring by

any number of additional servers over IP with included PowerAlert monitoring software.

Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage,

DC battery voltage and remaining battery capacity

Emergency Power Off (EPO) interface with cable

Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot

of connected devices

Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard

power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)

Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Attractive all-black color scheme

UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary

Specifications

OUTPUT

Output Volt Amp Capacity
(VA)

1500

Output kVA capacity (kVA)

1.5

Output Watt Capacity
(watts)

1000

Output kW capacity

1

Output power factor

0.7

Nominal Output Voltage(s)
Supported

230V

Nominal Voltage details

230v nominal inverter output voltage

Frequency compatibility

50 / 60 Hz

Output voltage regulation
(line mode)

-17%, +8%

Output voltage regulation
(Battery mode)

+/- 5%

Built-in UPS output
receptacles

8 C13 outlet(s)

Included output power
cables

Includes 2 C13 to C14 output power cables

Built-in controllable
switched load banks

Three switchable two-outlet C13 load banks

Output AC waveform (AC
mode)

Sine wave

Summary of Contents for SmartPro Rackmount SMX1500XLRT2U







Reviews: