9
Rear Panel (Continued)
Output Circuit Breakers Switches (Select Models Only):
These reset-
table circuit breakers protect your UPS from output overload. If one
or both breakers trip, remove some of the load on the circuit(s) and
allow the UPS to cool before pressing the breaker switch(es) in to
reset.
Input Cord (Select Models Only):
This permanently attached power
cord connects your UPS to a power outlet.
AC Receptacles (NEMA 5-15R) (Varied by Model):
These 15-, 20- and 30-amp receptacles provide your connected
equipment with pure sine-wave AC output from the AC line during
normal operation and from battery power during blackouts and
severe brownouts. Power provided at these outlets is filtered to pro-
tect connected equipment against damaging surges and line noise.
The receptacles are divided into numbered load banks, as labelled
on the unit. Using PowerAlert software and cabling, load banks one
and two may be individually turned off and on from a remote loca-
tion, allowing users to reset or reboot connected equipment. See
Serial Port Connection under Optional Connections.
NEMA 5-15R
NEMA 5-15/20R
