background image

13

Features

Ground Screw: 

Use this to connect any equipment that requires a 

chassis ground.

C20 Plug Sleeve: 

(Optional) Use the included C20 plastic sleeves to 

secure plugs to receptacles. Attach the sleeve to the plug making sure 
that the pull tabs remain outside the plug and that the fit is secure. To 
unplug equipment properly, use the pull tabs to remove the plug and 
sleeve from the receptacle.

RJ-45 Configuration Port: 

For factory use only.

C14 Plug Sleeve:

 (Optional) Use the included C14 plastic sleeves to 

secure plugs to receptacles. Attach the sleeve to the plug making sure 
that the pull tabs remain outside the plug and that the fit is secure. To 

unplug equipment properly, use the pull tabs to remove the plug and 
sleeve from the receptacle.

Service

Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended 
Warranty and On-Site Service Programs are also available from Tripp Lite. For more information 

on service, visit www.tripplite.com/support. Before returning your product for service, follow these 

steps:
1.   Review the installation and operation procedures in this manual to ensure that the service 

problem does not originate from a misreading of the instructions.

2.   If the problem continues, do not contact or return the product to the dealer. Instead, visit 

www.tripplite.com/support.

3.   If the problem requires service, visit www.tripplite.com/support and click the Product 

Returns link. From here you can request a Returned Material Authorization (RMA) number, 

which is required for service. This simple on-line form will ask for your unit’s model and 

serial numbers, along with other general purchaser information. The RMA number, along 

with shipping instructions will be emailed to you. Any damages (direct, indirect, special 

or consequential) to the product incurred during shipment to Tripp Lite or an authorized 
Tripp Lite service center is not covered under warranty. Products shipped to Tripp Lite or an 

authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA 

number on the outside of the package. If the product is within its warranty period, enclose 

a copy of your sales receipt. Return the product for service using an insured carrier to the 
address given to you when you request the RMA.

14-08-206-93338E.indb   13

10/9/2014   11:31:56 AM

Summary of Contents for PDU3XMV6G32

























































Reviews: