Specifications
Model:
PDU10K
Series Number:
AGAC4996
Nominal Voltage/Frequency:
120/240V; 50/60Hz
Maximum Load Rating (amps):
30 A
AC Receptacles:
(2) L6-30R, (2) L6-20R, (1) L5-30R, (2) 5-15/20R
AC Input:
Hardwire
Circuit Breakers (Resettable double pole):
1 x 20 A; 1 × 30 A
Dimensions (H×W×D, inches):
3.5 × 17.25 × 3.5
Input Connection
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and
workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or
replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product
(with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609. Seller will pay return shipping
charges. Call Tripp Lite at (773) 869-1234 before sending any equipment back for repair.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR
NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN.
EXCEPT TO THE EXTEND PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL
WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH
ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states
do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights,
and you may have other rights which vary from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe
for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation
or warranty as to the suitability or fitness of these devices for any specific application.
Policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.
Limited Lifetime Warranty
Features
Circuit Breakers
Your PDU features two double-pole output circuit breakers (20-amp and 30-amp). If the
current draw on the receptacles exceeds the amperage rating of its circuit breaker, the circuit
breaker will trip to prevent any possible damage. Remove excess draw and reset breaker.
Grounding Lug
Use this screw (located on the rear of the unit) to connect your PDU to ground.
200402057 93-2221
Access the PDU's hardwire input terminal box by removing the top
panel. Observe labeling on the terminals which indicate ground, neutral,
hot1 and hot2. Although only four terminals require wiring, your model
may or may not have two additional terminals, as shown in the diagram,
which have no function.
C
WARNING!
Hardwire input connection must be performed by a qualified electrician
observing appropriate local and national regulations, including the National
Electrical Code (NEC).
C
Standard PDU Shown
(Number of Terminals Varies
Depending on Model)
200402057 PDU10K Owner’s Manual.qxd 2/12/2004 4:29 PM Page 2
