5
Installation
LED Status Table
3
Connect fiber cabling matching the transceiver type to the
transceiver’s port and to a second media converter with a matching
transceiver.
4
Connect the RJ45 port on the second media converter to your
network device (workstation, hub, switch, etc.) using a Cat5e/6 cable.
5
Connect the external power supplies that came with each media
converter, and plug them into an AC power source.
LED
Status
Description
PWR (Green)
On
The unit is powered on
PWR (Green)
Off
The unit is not powered on
ALM (Red)
On
LFS enabled and link fault occurred
ALM (Red)
Off
LFS disabled or no link fault occurred
RJ45
1000 (Green)
On
Copper connection up to 1000 Mbps
1000 (Green)
Off
Copper connection speed at 10/100
Mbps or connection failed
LNK/ACT (Green)
On
Copper port correctly linked
LNK/ACT (Green)
Off
Copper port link failure
Fiber
1000 (Green)
On
Fiber connection up to 1000 Mbps
1000 (Green)
Off
Fiber connection speed at 10/100
Mbps or connection failed
LNK/ACT (Green)
On
Fiber port correctly linked and data is
transmitting
LNK/ACT (Green)
Off
Link failed, data is not transmitting
21-09-096-933F71-EN.indd 5
21-09-096-933F71-EN.indd 5
9/13/2021 9:17:46 AM
9/13/2021 9:17:46 AM
