4
Installation
Specifications
Notes:
• See
Optional Accessories
section for suggested cables.
• When the unit is connected to the Thunderbolt 3 port on your computer and to a
network via Cat5e/6 cabling, a network connection will automatically be established.
If no connection is made, one can be established manually by going to your
computer’s network settings page. For example, when using a Mac, navigate to the
Network section found in System Preferences, click the ‘Assist Me’ button to open
the Network Setup Assistant, then follow the prompts to establish a connection.
• Both HDMI and DisplayPort monitors can be connected at the same time for
transmitting 4K video to two displays at once.
1.
Connect the built-in Thunderbolt 3 USB-C cable to the Thunderbolt 3 port
on your laptop, tablet or other device.
2.
Use an HDMI cable to connect a monitor or display to the unit’s HDMI
port.
3.
Use a DisplayPort cable to connect a monitor or display to the unit’s
DisplayPort.
4.
Connect a USB peripheral to the unit’s USB-A port.
5.
For an Ethernet connection, use Cat5e/6 UTP cable to connect to the
unit’s RJ45 port.
Input Connector
Thunderbolt 3
USB-C (Male)
Output Connectors
USB-A
USB-A (Female)
DisplayPort
DisplayPort (Female)
HDMI
HDMI (Female)
Ethernet
RJ45 (Female)
Environmental
Operating Temperature
32° to 104°F (0° to 40°C)
Operating Humidity
10% to 85% RH, Non-Condensing
Storage Temperature
-4° to 185°F (-20° to 85°C)
Storage Humidity
5% to 90% RH, Non-Condensing
