Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with included External switch for wired remote control of APS
unit
APSRM4
accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables
automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
Front panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
SURGE / NOISE SUPPRESSION
AC suppression
joule rating
760
PHYSICAL
Shipping
Dimensions
(HWD/in)
13.5 x 15 x 21.5
Shipping
Dimensions
(HWD/cm)
34.3 x 38.1 x 54.6
Shipping weight
(lbs)
34.8
Shipping weight
(kg)
15.8
Unit Dimensions
(HWD/in)
7.25 x 8.5 x 16.25
Unit Dimensions
(HWD/cm)
18.4 x 21.6 x 41.3
Unit weight (lbs)
28.6
Unit weight (kg)
13.0
Cooling method
Fan
Material of
construction
Polycarbonate
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
information)
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time
from line power to
battery mode
4-6 milliseconds
Low voltage
transfer to battery
power
User configurable to 75V, 85V, 95V & 105V
High voltage
transfer to battery
power
User configurable to 135V, 145V
SPECIAL FEATURES
Appearance
Attractive gray color scheme
Load Sensing
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and
on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any
level, up to 150 watts.
