6
3b. Mount on Solid Brick and Concrete Block
WARNING
• When installing wall mounts on cinder block, verify the actual concrete thickness
is at least 1-3/8” (35mm) for using the concrete anchors. Do not drill into mortar
joints! Be sure to mount in a solid part of the block, generally 1” (25mm) minimum
from the side of the block. It is suggested an electric drill on a slow setting be used
to drill the hole instead of a hammer drill to avoid breaking out the back of the hole
when entering a void or cavity.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
Screw the wall
plate onto the
wall
Drill pilot holes
2
Find and mark the
exact location of
mounting holes
1
Concrete Anchor
Anchor Bolt
13-08-142-933298.indb 6
8/13/2013 12:56:25 PM
Summary of Contents for DWM1323SP
