Tripp Lite DMPDD1735AM, Owner'S Manual

Page: 10 / 60

10
Assembly
To properly balance the arm
with monitors mounted, adjust
the spring tension using the
supplied hex key as follows:
First, position and firmly hold the arm horizontally as shown.
Ask for assistance should you require it.
If the arm drops , turn the
adjustment screw counter-
clockwise until it stays in
a horizontal position.
If the arm rises , turn the
adjustment screw clockwise
until it stays in a horizontal
position.
To avoid damage to monitors or mount,
always keep the arm in a horizontal
position while making adjustments.
Ask for assistance should you require it.
Do not over-tighten screws.
6
7
Balancing the Arm
Securing the Cable
Management Covers
U