6
4. Setup
4.4 Connecting Devices and Powering the AC Unit
Your charging station contains three baskets
A
. To connect the device power bricks, place the bricks in the basket. Plug the power brick into an outlet
on the AC charger unit
B
, then run the device cable and connector through a device slot
C
. Repeat as needed for each device.
Notes:
Baskets are removable for easier power brick installation. If using fewer than 36 devices, you can adjust the number of shelf dividers for a particular shelf and
zone. For more information, refer to
4.3 Adjusting Storage Shelf Dividers
.
Devices 1-12
Devices 13-24
Devices 25-36
A
C
B
Plug and outlet type will vary by model.
Plug and outlet type will vary by model.