7
5. Setup
5.4 Connecting Devices and Powering the AC Unit
Your charging station contains three baskets, each with a divider to separate the Red Zone from the Blue Zone. Each half basket corresponds with its
storage shelf zone on the front side of the charging station (refer to
4. Zone Labeling
for more information). To connect the device power bricks, place
the bricks in the basket. Working one basket and zone at a time, plug the power brick into its designated outlet on the AC charger unit (see
A
for
Device/Basket assignments), then run the device cable and connector through a zoned device slot
B
and into the overhead cable manager
C
. Repeat
as needed for each zone and basket/shelf.
Notes:
Baskets are removable for easier power brick installation. If using fewer than 36 devices, you can adjust the number of shelf dividers for a particular shelf and
zone. For more information, refer to
5.3 Adjusting Storage Shelf Dividers
.
Red Zone
Blue Zone
Devices 7-12
Devices 1-6
Devices 19-24
Devices 13-18
Devices 31-36
Devices 25-30
A
C
B
