7
5. Setup
5.3 Connecting Devices and Powering the AC Unit
Your charging station contains three baskets, one for each shelf. To connect the device power
bricks, place the bricks in the basket. Working one basket at a time, plug the power brick into an
outlet on the AC power distribution unit, then run the device cable and connector through a device
slot
A
and into the overhead cable manager
B
. Repeat as needed for each slot.
Note:
Baskets are removable for easier power brick installation.
B
A
5.4 Door Locks
The doors contain a lock that is accessible with the included keys. The padlock hasp on the front
door provides an extra measure of security against device theft.
Connect all devices and place on their respective shelves. Once all devices are connected and
stored, find the AC unit’s input plug and cable located in the charging station’s bottom
compartment. The input plug extends through the cable access hole grommet located on the
bottom of the charging station cabinet
C
. Plug the power cord into the nearest 3-prong, grounded
wall outlet.
C
