6
2. Installation and Setup
2.3 Installing Batteries in an External Battery Pack Cabinet
If your external battery pack cabinet does not include batteries installed, follow the proper procedures to install
batteries inside the unit.
MAKE SURE THE BATTERY PACK CABINET IS DISCONNECTED FROM THE UPS BEFORE PERFORMING THE FOLLOWING
SEQUENCE OF OPERATIONS.
WARNING:
• Equipment should be installed by service personnel.
• When installing the batteries, use the same battery number and type as shown on the battery label.
• Do not open or mutilate the battery or batteries. The released electrolyte is harmful to the skin and eyes.
• A battery can present a risk of electric shock and high short-circuit current. Observe the following precautions when working on batteries:
o Remove watches, rings or other metal objects.
o Use tools with insulated handles.
Install Batteries in an External Battery Pack Cabinet:
Note:
Refer to the
External Battery Pack Wiring Diagram
and
External Battery Pack Cabinet Battery Wiring Table
for more information.
1. Remove the two side plates and four barrier plates.
2. Install 80 batteries into the battery pack.
3. Route the cables through the opening behind the battery breaker. DO NOT route cables through or around the shelves.
4. Reinstall the four barrier plates to secure all batteries.
When installing the barrier plates, do not short circuit the battery terminals. Injury or fire may result.
5. Connect the two red wires, two black wires and four blue wires from the fuse holder to the batteries.
6. Connect four 320 mm wires.
7. Connect 72 100 mm wires.
External Battery Pack Wiring Diagram
Back
Back
Front
RIGHT
LEFT
Barrier plate
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
70 69 68 67 66 65 64 63 62 61
71 72 73 74 75 76 77 78 79 80
21 22 23 24 25 26 27 28 29 30
51 52 53 54 55 56 57 58 59 60
40 39 38 37 36 35 34 33 32 31
50 49 48 47 46 45 44 43 42 41
Barrier plate
Barrier plate
Barrier plate
