Tripp Lite B126-1A1SR Owner'S Manual Download Page 7

7

Warranty & Warranty Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of 

one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to 
repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, 

you  must  obtain  a  Returned  Material  Authorization  (RMA)  number  from  TRIPP  LITE  or  an  authorized

 

TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service 

center with transportation charges prepaid and must be accompanied by a brief description of the problem 
encountered and proof of date and place of purchase. This warranty does not apply to equipment which 

has been damaged by accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT  AS  PROVIDED  HEREIN,  TRIPP  LITE  MAKES  NO  WARRANTIES,  EXPRESS  OR  IMPLIED, 
INCLUDING  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE. 

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid 

limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, 
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, 

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for 
any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of 
software, loss of data, costs of substitutes, claims by third parties, or otherwise.

WARRANTY REGISTRATION

Visit  www.tripplite.com/warranty  today  to  register  the  warranty  for  your  new  Tripp  Lite  product.

 

You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. 

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, 
when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

•  Send old equipment for recycling on a one-for-one, like-for-like basis (this varies 

depending on the country)

•  Send the new equipment back for recycling when this ultimately becomes waste

WARNING

Use of this equipment in life support applications where failure of this equipment can reasonably 
be expected to cause the failure of the life support equipment or to significantly affect its safety 

or effectiveness is not recommended. Do not use this equipment in the presence of a flammable 

anesthetic mixture with air, oxygen or nitrous oxide.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change 

without notice.

201201216-93-3163.indd   7

2/9/2012   9:15:40 AM

Summary of Contents for B126-1A1SR









Reviews: