background image

Heading

Owner’s Manual

IP Remote Access Unit 

Model #: B050-000

The B050-000 provides remote KVM access and control. You can use the B050-000 to
manage and monitor components in your servers through a modem or LAN, even if your
network is down. The B050-000 offers a comprehensive hardware solution for server
management.

If you need help installing, configuring or running the B050-000 IP Remote Access Unit,
call a Tripp Lite Technical Support Representative at (773) 869-1234 or visit Tripp Lite's
website at: www.tripplite.com

About the B050-000

Technical Support

W

arranty 

Registration

Register online toda

y f

or a 

chance to win a FREE 

Tripp Lite

pr

oduct! www

.tripplite

.com/warranty

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234 • www.tripplite.com

Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices.

Copyright © 2006 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners. 

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

LISTED

1F61
I.T.E.

Summary of Contents for B050-000





































































































Reviews: